We use the dishwashing sink every day to wash food and dishes. During our use, some oil and food residue will also fall into the sewer. After a long time, the sewer will easily appear. clogging situation.

Fortunately, a friend who works in decoration taught me this trick. I don't need to spend money to hire someone to unclog it. I can easily do it at home. After trying it, it can be unclogged as soon as it is unclogged. The method is relatively easy to use.

First, we bring a bottle of white vinegar and pour it into the pipe of the sink.

You can pour more. When we pour the white vinegar in, the white vinegar will flow down around the pipe. White vinegar contains acetic acid. , can soften the heavy oil stains in the pipes. After pouring, we let it sit for a while and prepare for the next step.

Next, we take a container and pour an appropriate amount of baking soda into it. Baking soda is alkaline. Products such as washing powder, dish soap, and laundry detergent at home also contain alkaline substances. We Mixing baking soda and water not only has a very good decontamination effect, but also can break down the grease in the oil.

Adding baking soda to cleans can break down the heavy oil inside.

Then, we pour an appropriate amount of dishwashing liquid into it. Usually, we use dishwashing liquid when cleaning dishes and chopsticks. Dishwashing liquid has a very good cleaning effect and can clean oil and grease stains. Adding dishwashing liquid After that, it will be used to clean the oil stains in the pipes, and it will get twice the result with half the effort.

Next, we prepare some boiling water and pour the boiling water into the solution. If there is hot water in the faucet at home, you can also turn the hot water to the highest level and then put it out. The temperature of the boiling water is relatively high and it can also dissolve oil stains. If you wash dishes frequently, Friends all know that every time you wash the dishes, if the oil stain is not easy to clean out, you can easily clean the oil stain by adding hot water to the dishwasher.

Then, we take a spoon and stir the solution for a while, so that the baking soda and dishwashing liquid inside are fully dissolved and mixed together, thus a pipe unblocking agent is prepared.

Now, we use a spoon to pour the solution into the pipe. After the sewer pipe has been soaked in white vinegar, the heavy oil stain inside has almost been softened. We pour the solution in to clean the oil stain in the pipe. The solution flows into the pipe. When we do this, we will clean out the oil around the pipe and slowly flow it down the pipe. We pour out all the solution and let it sit for about ten minutes.

Ten minutes later, we turned on the hot water from the faucet again, turned on the water output to the maximum, and used the hot water to rinse away all the oil residue in the pipes, so that we could easily unclog the sink pipes. If you have a pipe dredge at home, you can also use the dredge to clear the oil for a while when draining the water to thoroughly clean the oil stains.

Usually, when we use the sink, the sink filter must be placed, so that every time it is used, it can block most of the vegetable residue and foreign matter from falling into the sewer. If you find that there is something on this filter Foreign objects should also be cleaned in time to prevent foreign objects from falling into the sewer and accumulating in the sewer, causing blockage.